photo DSC_0674.jpg

There are two closets in my office that hold a lot of good stuff - fabric and trim and wallpaper samples. Since I use these closets often, I decided to make them prettier and I gave the doors a little facelift recently. Here's what the boring hollow core doors looked like on move-in day.

 photo IMG_6373.jpg

The painters our landlord insisted on using didn't prime any of the doors before painting them black (with latex paint??), so I've been going back one by one and re-coating with primer and oil-based paint. Here's what the doors looked like after removing the old hardware and giving them a light sanding. This was also after I took down the blue wallpaper. (We had a little photoshoot in the space a couple months ago and the wallpaper needed to be removed. It's a long story, but I was fine with it.)

 photo DSC_0245.jpg

At one point I had installed a big brass knob on the far right door, thinking I had four knobs, but I actually only had three (you can see one of them in this post). Bummer. The knobs were a little big for the closet doors anyway, so I started looking around for a good, but mostly inexpensive alternative. I found these solid brass knobs at Home Depot for $5 each and they fit the bill just fine. A little on the small side compared to the others, but probably a more appropriate size for closet doors.

 photo IMG_9171.jpg

I sanded the doors down by hand, which was a mistake. I should have pulled out my palm sander or even stripped the doors with my beloved Citristrip. There was definitely a texture left that I hoped wouldn't showed through the new paint, but it did a bit. It's not all that horrible in person, but learn from my mistakes and don't take the shortcuts here like I did. :) Hopefully your doors are smoother than mine were and the whole problem can be avoided.

 photo 2DSC_0207.jpg

I had a bunch of pre-cut trim from a few old projects that I decided to use on the closet doors. Since all of it was pre-cut, all my long pieces were ready to be installed on the door with my brad gun and this project was a cinch. I only had to cut the short pieces and the pieces for the small boxes in the center of each door.

 photo DSC_0303.jpg

I made things really easy on myself and made it so every border was 3" wide. This way I could just eyeball the placement of the trim, hold it up, verify with a ruler that the trim edge was 3" away from the door edge (or the next piece of trim) and then put in a nail with my brad gun. No marking out, no levels. Fast and easy.

 photo DSC_0327.jpg

Once all the molding was nailed up, I sealed all the seams with paintable caulking and gave that a light sanding when it had dried.

 photo DSC_0360.jpg

The old hardware holes were patched too and then the doors were ready to be painted.

 photo DSC_0390.jpg

The only dark-tint primer I had on hand was a cheap brand that I'm not a big fan of, but I used it anyway to prime the new trim. Not surprisingly, it didn't do a great job of sealing the raw wood. So the trim took the oil-based paint differently than the old door did. C'est la vie, I guess. (Note to self: Only buy Zinsser!)

 photo DSC_0426.jpg

It's hard to photograph super glossy walls and doors, so you'll just have to trust me that it looks prettier in person. :) But I'm happy with how the project turned out.

 photo DSC_0501.jpg

 photo DSC_0684.jpg

I love the shine and the bit of dimension that the new trim adds. And I love the new wall color (BM Chelsea Gray) with the black doors too. The masculine neutrals help tone down some of the brighter colors I have in the space (like the neon tetanus console). :)

 photo DSC_0653.jpg

One step closer to finishing this room that still needs a lot of work!

 photo DSC_0535copy.jpg

PS Here's the door in our old loft to my girls room that I trimmed out (without any power tools!) and painted a bright yellow. And another, better shot in this post.

Have you trimmed out any of your interior doors? I love how it can really elevate those hollow core doors so many of us are cursed with! :)

0 comments :

Post a Comment

 
Top